Holiday craft table
DIY paper star ornament for the holidays
That leftover wrapping paper is nearly everything you need. Two accordion folds, a little glue and a length of thread become a star for the tree. Start with two equal squares so the halves are easy to match.
Jump to the steps
What you’ll need
- Two sheets you can cut into 15 × 15 cm (about 6 × 6 in) squares
- Ruler, pencil and scissors
- Glue stick or thin double-sided tape
- Thread or narrow ribbon for hanging
Let’s take it step by step
- Cut two matching squares. Measure and cut two squares, 15 × 15 cm (about 6 × 6 in). Ordinary coloured paper or lightweight wrapping paper works well. With patterned paper, make a practice fold to see which side you want showing.
- Make two matching accordions. Fold the first edge over by about 1.5 cm (just over ½ in). Flip the paper and make another fold the same width. Keep alternating until you reach the other end. Compare the two folded strips: they should be about the same length and thickness.
- Make the points. For pointed tips, trim a small diagonal corner off each end of the folded strip. Keep the cuts shallow, then repeat on the second strip. If your scissors struggle with the layers, skip the trimming and make a festive paper rosette instead.
- Open two fans. Fold each accordion in half across its pleats to find the middle. Glue the two inner sides that meet at the fold. Let the glue take hold, then open each fan into a half-circle.
- Join the star and add a loop. Fit the two half-circles together and glue both pairs of loose edges. Slip a loop of thread into the top join or attach it to the back and cover it with a small piece of paper. Let the glue dry before hanging your star. Another small gift idea: a fabric bookmark
For another star with sharp points, try the printable templates below.







