Stitches Over Tea
RUEN
Back to the home page

First dress

Your first knit dress: how to keep the neckline from stretching out

Laid your dress on the table and found a little wave around the neckline? Let’s start with a pair of scraps, not the dress. We’ll test the stitch and see how to guide the fabric without stretching the opening out of shape.

Jump to the steps
Filya at the sewing table beside the knit fabric
An illustration of Filya comparing two samples: the top edge is flat, the lower one is wavy.

What you’ll need

  • Knit fabric and scraps for testing
  • A knit needle and thread
  • Pins or clips
  • A sewing machine with a zigzag or stretch stitch

How to spot a good test seam

Lay the sample on a table before trying on the dress. If it looks like the sample on the right, fix the stitch on a scrap first.

Flat neckline with a tick on the left; rippled neckline with a cross on the right.
Flat: the edge lies smoothWavy: the edge has stretched

Let’s take it step by step

  1. Check the pattern before you start. Look for the required stretch and the neckline finish. A neckband is a strip of knit folded in half; a facing is a piece cut to match the curve. If your pattern uses a facing, follow those directions instead of stretching it like a band. What else to check before cutting
  2. Recreate the seam on scraps. Cut a couple of pieces from the same knit. Use the same number of layers and the same stretch direction as the neckline. Try a jersey needle for ordinary jersey, or a stretch needle for very stretchy fabric with elastane. Choose the needle size for the fabric and your machine.
  3. Test the stitch before cutting the dress. If the seam needs to stretch, try a narrow zigzag or a stretch stitch. Don’t pull from behind the presser foot. Lay the sample flat, then give it a gentle stretch. The edge should sit flat, the thread shouldn’t pop, and the fabric should spring back.
  4. Match the marks and take your time. If the pattern calls for a neckband, pin it at the pattern marks. Gently stretch only the band between those marks until it fits. Don’t pull the neckline itself. Support the dress on your table so its own weight doesn’t stretch the opening.
  5. If an edge goes wavy, pause. Test the iron on a scrap first, then press gently without sliding it. If it’s still wavy, sew another sample without pulling. If your machine allows it, try slightly lower presser-foot pressure. Skipped stitches? Check the needle. Popping thread? Try a more flexible stitch on the sample.

Prefer a ready-made pattern?

Affiliate link: the club may earn a commission if you subscribe through it.