Stitches Over Tea
RUEN
Back to the home page

First project

A bookmark from two scraps

Choose two favourite scraps: one for each side of the bookmark. The finished size is about 4 × 15 cm. Thin cotton works well. Skip bulky padding.

Jump to the steps
Filya the cat plays with fabric scraps for a bookmark

What you’ll need

  • Two thin scraps, at least 6 × 17 cm each
  • Ruler, scissors and thread
  • Pins or clips
  • Sewing machine or hand-sewing needle

Cutting diagram

17 cm6 cm× 2
Cut two identical pieces. Measurements include seam allowances.

Let’s take it step by step

  1. Cut two 6 × 17 cm rectangles. The 1 cm seam allowances are included. If the print has a top and bottom, mark them before cutting.
  2. Put them right sides together. Pin the edges. Mark a 4–5 cm opening halfway along a long edge for turning.
  3. Sew around with a 1 cm seam allowance. Leave the opening unsewn. Secure the stitches, then trim diagonally across the corners, avoiding the stitching.
  4. Turn right side out and press. Ease out corners with a blunt tool. Fold the opening edges in by the seam allowance. Press if the fabric allows.
  5. Close the opening. Topstitch 2–3 mm from the edge, or close the opening by hand with slip stitches. Now tuck it into a favourite book.

Another project to try

Affiliate link: the club may earn a commission if you buy through it.
Enter the club